|
For more information see appropiate web pages, Write - Concrete Care Ltd P.O. Box 64-281, Botany Auckland, New Zealand E-Mail - info@concretecare.co.nz or fill in our quote request form Or you can call us on Mob - 021 4 CONCRETE Mob - 021 4266 27 Office - 0800 733 566 Fax - 09 534 8326
|
||||||
|
Cretecova. Cretecova is a trowel finished flooring. A special blend of Cement, Polymer and fine aggregate fuse together to make an extremely hard surface. The product is manufactured and imported in various colours which can be blended together to create an unlimited range of colours and tones. The Product is coloured right through and is not effected by UV rays. Please note we import our products because they are the best, this means you can trust them to last. The whole Cretecova process takes 2 days in most instances (up to about 150SqM). Day 1 - Floor is prepared ready for application, an initial skim coat of Cretecova is applied, this creates a high strength chemical and mechanical bond to the whole surface of the substrate. When dried sufficiently a finish layer is applied with the desired effect. Effects can be :-
The following day we can scribe a tile pattern into the surface, usually greater than 600mm tiles, square or rectangular. The "grout lines" (no actual grout or associated problems) can be 1, 4, 6 or 10mm wide. After this we colour wash the floor to provide a multi-toned effect, this colour also becomes the "grout" colour. (There is no grout to go mouldy and fall out). After this 2 coats of sealer are applied and the following day the area ready for use. Features of Cretecova
|
||||||
| Home | Grinding | Cretecova | Resealing | Epoxy | Creteshield | Resurfacing | Spraycova | Colour charts | Gallery | Quote request | ||||||